Hardwood Maintenance
Keep wood floors presentable and identify when deeper restoration is warranted.
A clear first review of the work.
Every property and surface is different. We begin with the current condition, access, affected areas, and your priorities before discussing a specific scope.
The cheapest hardwood floor to own is one that gets a screen and recoat before the finish wears through to bare wood. Once traffic lanes go grey the job becomes a full sand. We review the wear pattern, check whether the existing finish will accept a new coat (waxed or oil-soaped floors will not), and tell you which side of that line the floor is on. Full refinishing and repairs are done by Tidal Flooring, our in-house C-15 division.
- Wear-pattern review
- Maintenance versus refinishing guidance
- Coordination with Tidal Flooring when appropriate
Questions about hardwood maintenance
How often should hardwood floors be recoated?
When the finish starts to dull in the traffic lanes and before it wears through to bare wood, which in most homes is every few years rather than on a fixed schedule. A screen and recoat at that point plans at $2 to $4 per sq ft and takes 1 to 2 days; waiting until boards go grey turns it into a full refinish at $4 to $9.
Can every hardwood floor be recoated?
No. Floors that have been waxed, cleaned with oil soaps or treated with certain polishes will not bond to a new coat, and the new finish peels. Tidal Flooring runs an adhesion test on the floor before quoting a recoat; if it fails, the honest options are a full sand or leaving it as is.
What should I use to clean hardwood between recoats?
A cleaner made for finished hardwood, applied with a barely damp microfiber mop, and nothing that leaves a residue: no wax, no oil soap, no steam, no vinegar on a water-based finish. Felt pads under furniture and a mat at exterior doors (coastal sand is an abrasive) do more for the finish than any product.
